Solaris Control Domain - LDOM

login as: root
Using keyboard-interactive authentication.
Password:
Last login: Mon Dec  3 21:22:47 2012 from 10.152.39.133
Oracle Corporation      SunOS 5.11      11.1    September 2012
You have new mail.
root@samplectrldom04:~#
root@samplectrldom04:~#
root@samplectrldom04:~# ldm ls
NAME             STATE      FLAGS   CONS    VCPU  MEMORY   UTIL  UPTIME
primary          active     -n-c--  UART    64    261632M  0.1%  4d 3h 46m
root@samplectrldom04:~#
root@samplectrldom04:~#
root@samplectrldom04:~# ldm list-services primary
root@samplectrldom04:~#
root@samplectrldom04:~#
root@samplectrldom04:~# ldm add-vds primary-vds0 primary
root@samplectrldom04:~# ldm add-vcc port-range=5000-5100 primary-vcc0 primary
root@samplectrldom04:~# dladm show-link
LINK                CLASS     MTU    STATE    OVER
net1                phys      1500   up       --
net4                phys      1500   up       --
net3                phys      1500   up       --
net0                phys      1500   up       --
net2                phys      1500   up       --
aggr1               aggr      1500   up       net0 net1 net2 net3
root@samplectrldom04:~# ldm add-vsw net-dev=aggr1 primary-vsw0 primary
root@samplectrldom04:~# ldm list-services primary
VCC
    NAME             LDOM             PORT-RANGE
    primary-vcc0     primary          5000-5100

VSW
    NAME             LDOM             MAC               NET-DEV   ID   DEVICE     LINKPROP   DEFAULT-VLAN-ID PVID VID                  MTU   MODE   INTER-VNET-LINK
    primary-vsw0     primary          00:14:4f:f9:ec:02 aggr1     0    switch@0              1               1                         1500         on

VDS
    NAME             LDOM             VOLUME         OPTIONS          MPGROUP
    primary-vds0     primary

root@samplectrldom04:~# ldm set-mau 1 primary
1 crypto units exceeds the system capacity of 0 crypto units
root@samplectrldom04:~# ldm set-vcpu 8 primary
root@samplectrldom04:~# ldm set-memory 15g primary
Only 236G of memory could be removed from the primary domain
because the rest of the memory is in use.
root@samplectrldom04:~# Dec  4 21:23:26 samplectrldom04 ldmd[726]: [ID 574227 us

root@samplectrldom04:~# ldm ls
NAME             STATE      FLAGS   CONS    VCPU  MEMORY   UTIL  UPTIME
primary          active     -n-cv-  UART    8     19968M   0.2%  4d 4h 17m
root@samplectrldom04:~# ldm set-memory 15G primary
root@samplectrldom04:~# ldm ls
NAME             STATE      FLAGS   CONS    VCPU  MEMORY   UTIL  UPTIME
primary          active     -n-cv-  UART    8     15G      1.6%  4d 4h 18m
root@samplectrldom04:~#
root@samplectrldom04:~# ldm list-spconfig
factory-default [next poweron]
root@samplectrldom04:~# ldm add-config initial
root@samplectrldom04:~# ldm list-spconfig
factory-default
initial [current]
root@samplectrldom04:~#
root@samplectrldom04:~# w
  9:27pm  up 4 day(s),  4:19,  1 user,  load average: 0.02, 0.09, 0.05
User     tty           login@  idle   JCPU   PCPU  what
root     pts/1         8:53pm                      w
root@samplectrldom04:~# reboot -- -r
#svcadm enable vntsd


1. configure ASR
2. configure cfg2html and monitor scripts